Top Benefits
About the role
Rebar Fabricators, bend, cut, bundle, and load reinforcing steel bars in accordance with customer orders.
Primary Duties and Responsibilities
- Demonstrate conduct consistent with Nucor Rebar Fabrication's vision and values.
- This is an entry level position. Incumbent may operate any one of the following machines:
- Operate a bender to fabricate reinforcing steel to required dimensions
- Operate a shearing machine to cut reinforcing steel bars to specific lengths.
- Operate an overhead crane to move, assemble, and select material to be fabricated or shipped.
- Setting up and operating threading machines
- Installing and adjusting tooling, such as dies, cutters, chamfering tools, cams, gears and pulleys,
- Monitoring machine operation and adjusting feed mechanisms
- Sharpening die cutters and performing routine maintenance
- Unload trailers and store materials in storage bins.
- Feeding and securing stock manually or with hoists into machine chucks
- Assemble and load orders onto trailers for shipping.
- Maintain the shop or designated area in a clean and safe manner.
- Assist other employees in any of the above tasks.
Minimum Qualifications and Education Requirements
- Must have basic math skills to be able to calculate bar measurements
- High school diploma or equivalent (Preferred)
- Training: Most operators receive 3 months of on-the-job training
- Skills:
- Mechanical aptitude
- Ability to read blueprints and job orders
- Familiarity with precision measuring tools (micrometers, calipers, tape measure)
- Following site specific Safe Work Practices and Job Procedures
- Safety awareness and use of PPE
Benefits
- Extended health, dental and vision care benefits.
- Company RRSP plan with employer match.
- Stock purchase plan.
- Scholarship opportunities.
- Career growth opportunities.
Physical and Special Demands
- Standing, bending, lifting, and repetitive motions Some heavy lifting may be necessary.
- Indoor shop, working conditions can be noisy/dusty/hot/cold, with exposure to hazardous machinery, and chemicals
- Overtime hours may be required to meet operational demands.
- Must be able to work any shift.
- Must become familiar with and adhere to shop safety policies and procedures.
- Must have a form of reliable transportation
About Nucor Corporation
Nucor Corporation and its affiliates manufacture steel and steel products at more than 300 operating facilities primarily in North America. Nucor is the largest steel producer in the United States, operating 26 circular-based steel mills that have an annual production capacity of more than 27,000,000 tons. Nucor is also North America's largest recycler, processing approximately 20 million tons of ferrous scrap annually to produce new steel that is 100% recyclable at the end of its useful life. Nucor’s headquarters are located in Charlotte, North Carolina, and the company employs more than 31,000 teammates.
Top Benefits
About the role
Rebar Fabricators, bend, cut, bundle, and load reinforcing steel bars in accordance with customer orders.
Primary Duties and Responsibilities
- Demonstrate conduct consistent with Nucor Rebar Fabrication's vision and values.
- This is an entry level position. Incumbent may operate any one of the following machines:
- Operate a bender to fabricate reinforcing steel to required dimensions
- Operate a shearing machine to cut reinforcing steel bars to specific lengths.
- Operate an overhead crane to move, assemble, and select material to be fabricated or shipped.
- Setting up and operating threading machines
- Installing and adjusting tooling, such as dies, cutters, chamfering tools, cams, gears and pulleys,
- Monitoring machine operation and adjusting feed mechanisms
- Sharpening die cutters and performing routine maintenance
- Unload trailers and store materials in storage bins.
- Feeding and securing stock manually or with hoists into machine chucks
- Assemble and load orders onto trailers for shipping.
- Maintain the shop or designated area in a clean and safe manner.
- Assist other employees in any of the above tasks.
Minimum Qualifications and Education Requirements
- Must have basic math skills to be able to calculate bar measurements
- High school diploma or equivalent (Preferred)
- Training: Most operators receive 3 months of on-the-job training
- Skills:
- Mechanical aptitude
- Ability to read blueprints and job orders
- Familiarity with precision measuring tools (micrometers, calipers, tape measure)
- Following site specific Safe Work Practices and Job Procedures
- Safety awareness and use of PPE
Benefits
- Extended health, dental and vision care benefits.
- Company RRSP plan with employer match.
- Stock purchase plan.
- Scholarship opportunities.
- Career growth opportunities.
Physical and Special Demands
- Standing, bending, lifting, and repetitive motions Some heavy lifting may be necessary.
- Indoor shop, working conditions can be noisy/dusty/hot/cold, with exposure to hazardous machinery, and chemicals
- Overtime hours may be required to meet operational demands.
- Must be able to work any shift.
- Must become familiar with and adhere to shop safety policies and procedures.
- Must have a form of reliable transportation
About Nucor Corporation
Nucor Corporation and its affiliates manufacture steel and steel products at more than 300 operating facilities primarily in North America. Nucor is the largest steel producer in the United States, operating 26 circular-based steel mills that have an annual production capacity of more than 27,000,000 tons. Nucor is also North America's largest recycler, processing approximately 20 million tons of ferrous scrap annually to produce new steel that is 100% recyclable at the end of its useful life. Nucor’s headquarters are located in Charlotte, North Carolina, and the company employs more than 31,000 teammates.