Engineer Lead (Process) – Cryogenic LPG/NGL Recovery
About the role
In this position, Propak can offer the following career development opportunities:
- Work on a variety of gas processing and heavy oil projects for domestic and international clients. The scope of the projects will vary from FEED studies, modular packages and full turnkey EPFC projects.
- Acquire in-depth technical expertise in natural gas and heavy oil processing
- Lead and mentor junior engineers, including supervision, checking and authentication of professional work products.
- Become a critical decision maker while working with a multidisciplinary team of engineering and design leads
- Develop and build relationships with clients
- Gain practical experience by overseeing the fabrication and assembly of your projects in the Propak, Airdrie facilities.
- Travel domestically and internationally for startup and commissioning support
- Receive mentorship from senior process engineers, supervisors, and managers to support your technical development and role as a lead process engineer
Qualifications:
- Bachelor’s degree in chemical engineering from an accredited university
- Professional Engineer registered and in good standing with Alberta Professional Engineers, and Geoscientists of Alberta (APEGA) or eligible for membership.
- 5+ years of experience in natural gas processing experience with specific experience in Molecular Sieve and Cryogenic “Deepcut” Turbo-Expander LPG and/or NGL Recovery facility design is required.
- Experience designing alternative processes in Glycol Dehydration, Sweetening, Oil Processing is considered an asset.
- EPC and/or Fabricator experience
- Excellent communications skills required to interact with client and internal team members
- Experience working with HYSYS and other engineering software (BR&E ProMax, VMGSim Symmetry, Flarenet)
- Experience in sizing process equipment is an asset (separators, towers, heat exchangers, PSVs, flare systems, control valves, pumps, compressors)
- Experience with typical process deliverables (PFD, HMB, P&ID, Line List, Design Basis Memorandum, Cause & Effect Diagrams, Control Narratives, Datasheets)
Propak Systems Ltd. thanks all applicants for their interest however only those selected for an interview will be contacted.
No Phone Calls Please
Keywords: Modular or Modularization Acid Gas Amine Ariel Distributor Brazed Aluminum Heat Exchanger (BAHX) Bryan Research and Engineering (BRE or BR&E) Cause and Effect Diagram or “Shutdown Key” (C&E, SDK) Centrifugal Compressor Centrifugal Pump Contract Control Narrative Controls Cryogenic Deep cut Dehydration Dewpoint Direct Fired Heater Efficiency Engineering, Procurement, and Construction (EPC EPF EPFC) Engineers and Geoscientists of British Columbia (EGBC) Ethane Exchanger Design and Rating Expander-Compressor Fabricator Flare Flarenet Fractionation or Distillation Gas Subcooled Process (GSP) Heat Medium Heat recovery Hot Oil hydrocarbon Hydrogen Sulphide or Sulfide HYSYS International Joule-Thomson (J-T JT) Liquified Petroleum Gas (LPG) Manufacturing Methane Molecular Sieve Natural Gas Liquids (NGL) Natural Gas Processing Oil & Gas Oilfield Equipment Original Equipment Manufacturer (OEM) Plate Fin Heat Exchanger Pressure Relief System Pressure Safety Valve (PSV) Pressure Vessel Process Engineering Process Intensification Process Optimization Process Selection Professional Engineer (P.Eng.) ProMax Propane Recovery Reciprocating Compressor Recycle Split Vapor (RVS) Salary Seperator Shell and Tube Heat Exchanger Single Column Overhead Recycle Start-up and Commissioning Sweetening the Association of Professional Engineers and Geoscientists of Alberta (APEGA) Treating Tri ethylene Glycol (TEG) Troubleshoot Turbo-Expander UltraTEF Utilities VMGSim or Symmetry Y Grade Turnkey or Turn-Key Control Valve Filtration Process Flow Diagram (PFD) Mechanical Flowsheet (MFS) Process and Instrument Diagram (P&ID) Material Selection Diagram (MSD) Heat and Material Balance or Mass Balance (H&MB or HMB) Design Basis Memorandum Datasheets API-521 API-520 ASME B31.3 API-610, API-682 Stream Assisted Gravity Drainage (SAGD) Central Processing Facility Greenfield Brownfield Quotation (RFQ) Cost Estimate Lead Column or Tower Mass Transfer
About Propak Systems Ltd.
Propak provides comprehensive solutions to help our clients meet their project execution strategy by designing and building energy processing facilities and equipment. Experts in gas processing and heavy oil processing. Large-scale fabrication integrated with a full-service international engineering company. Complete energy facilities and individual process units. A design and build firm together with an energy services company that engineers, constructs, commissions and services energy processing equipment and plants. We have many locations, in Alberta, including Airdrie, Grande Prairie, Lloydminster, Medicine Hat, Rocky Mountain House, and also in Fort St. John, BC, Swift Current, SK, and Casper, Wyoming.
At Propak, personal job satisfaction is driven by factors critical to engaging quality people. These factors help our employees choose how to balance his or her career path while maintaining a quality family life. The strength of our company is in the strength of our people; that is why we are looking for talented and motivated individuals that are encouraged to stretch their abilities to provide the optimal in products and services to our customers both domestically and internationally.
Engineer Lead (Process) – Cryogenic LPG/NGL Recovery
About the role
In this position, Propak can offer the following career development opportunities:
- Work on a variety of gas processing and heavy oil projects for domestic and international clients. The scope of the projects will vary from FEED studies, modular packages and full turnkey EPFC projects.
- Acquire in-depth technical expertise in natural gas and heavy oil processing
- Lead and mentor junior engineers, including supervision, checking and authentication of professional work products.
- Become a critical decision maker while working with a multidisciplinary team of engineering and design leads
- Develop and build relationships with clients
- Gain practical experience by overseeing the fabrication and assembly of your projects in the Propak, Airdrie facilities.
- Travel domestically and internationally for startup and commissioning support
- Receive mentorship from senior process engineers, supervisors, and managers to support your technical development and role as a lead process engineer
Qualifications:
- Bachelor’s degree in chemical engineering from an accredited university
- Professional Engineer registered and in good standing with Alberta Professional Engineers, and Geoscientists of Alberta (APEGA) or eligible for membership.
- 5+ years of experience in natural gas processing experience with specific experience in Molecular Sieve and Cryogenic “Deepcut” Turbo-Expander LPG and/or NGL Recovery facility design is required.
- Experience designing alternative processes in Glycol Dehydration, Sweetening, Oil Processing is considered an asset.
- EPC and/or Fabricator experience
- Excellent communications skills required to interact with client and internal team members
- Experience working with HYSYS and other engineering software (BR&E ProMax, VMGSim Symmetry, Flarenet)
- Experience in sizing process equipment is an asset (separators, towers, heat exchangers, PSVs, flare systems, control valves, pumps, compressors)
- Experience with typical process deliverables (PFD, HMB, P&ID, Line List, Design Basis Memorandum, Cause & Effect Diagrams, Control Narratives, Datasheets)
Propak Systems Ltd. thanks all applicants for their interest however only those selected for an interview will be contacted.
No Phone Calls Please
Keywords: Modular or Modularization Acid Gas Amine Ariel Distributor Brazed Aluminum Heat Exchanger (BAHX) Bryan Research and Engineering (BRE or BR&E) Cause and Effect Diagram or “Shutdown Key” (C&E, SDK) Centrifugal Compressor Centrifugal Pump Contract Control Narrative Controls Cryogenic Deep cut Dehydration Dewpoint Direct Fired Heater Efficiency Engineering, Procurement, and Construction (EPC EPF EPFC) Engineers and Geoscientists of British Columbia (EGBC) Ethane Exchanger Design and Rating Expander-Compressor Fabricator Flare Flarenet Fractionation or Distillation Gas Subcooled Process (GSP) Heat Medium Heat recovery Hot Oil hydrocarbon Hydrogen Sulphide or Sulfide HYSYS International Joule-Thomson (J-T JT) Liquified Petroleum Gas (LPG) Manufacturing Methane Molecular Sieve Natural Gas Liquids (NGL) Natural Gas Processing Oil & Gas Oilfield Equipment Original Equipment Manufacturer (OEM) Plate Fin Heat Exchanger Pressure Relief System Pressure Safety Valve (PSV) Pressure Vessel Process Engineering Process Intensification Process Optimization Process Selection Professional Engineer (P.Eng.) ProMax Propane Recovery Reciprocating Compressor Recycle Split Vapor (RVS) Salary Seperator Shell and Tube Heat Exchanger Single Column Overhead Recycle Start-up and Commissioning Sweetening the Association of Professional Engineers and Geoscientists of Alberta (APEGA) Treating Tri ethylene Glycol (TEG) Troubleshoot Turbo-Expander UltraTEF Utilities VMGSim or Symmetry Y Grade Turnkey or Turn-Key Control Valve Filtration Process Flow Diagram (PFD) Mechanical Flowsheet (MFS) Process and Instrument Diagram (P&ID) Material Selection Diagram (MSD) Heat and Material Balance or Mass Balance (H&MB or HMB) Design Basis Memorandum Datasheets API-521 API-520 ASME B31.3 API-610, API-682 Stream Assisted Gravity Drainage (SAGD) Central Processing Facility Greenfield Brownfield Quotation (RFQ) Cost Estimate Lead Column or Tower Mass Transfer
About Propak Systems Ltd.
Propak provides comprehensive solutions to help our clients meet their project execution strategy by designing and building energy processing facilities and equipment. Experts in gas processing and heavy oil processing. Large-scale fabrication integrated with a full-service international engineering company. Complete energy facilities and individual process units. A design and build firm together with an energy services company that engineers, constructs, commissions and services energy processing equipment and plants. We have many locations, in Alberta, including Airdrie, Grande Prairie, Lloydminster, Medicine Hat, Rocky Mountain House, and also in Fort St. John, BC, Swift Current, SK, and Casper, Wyoming.
At Propak, personal job satisfaction is driven by factors critical to engaging quality people. These factors help our employees choose how to balance his or her career path while maintaining a quality family life. The strength of our company is in the strength of our people; that is why we are looking for talented and motivated individuals that are encouraged to stretch their abilities to provide the optimal in products and services to our customers both domestically and internationally.