Senior Substation Protection and Controls Engineer
Top Benefits
About the role
Are you a senior professional engineer with deep expertise in substation protection, controls, automation, and commissioning? Juno Engineering Canada Inc. is seeking a Senior Substation Protection & Controls Engineer to lead protection and controls engineering for utility, renewable energy, power generation, and industrial substation projects across Western Canada.
About the Role
This position is responsible for protection and controls engineering for greenfield and brownfield substations, switching stations, and grid interconnections. The role includes protection philosophies, fault and coordination studies, relay settings and logic, detailed P&C design, SCADA and telecommunications interfaces, AC and DC systems, testing, commissioning, and energization support.
In this role, you’ll serve as a technical lead, directing P&C design from concept and FEED through issued-for-construction documentation, panel fabrication, field implementation, testing, commissioning, and project closeout.
At Juno, we empower our team to drive sustainable progress across power generation, renewable energy, and advanced industrial projects. With over 40 years of engineering excellence, we foster a collaborative, forward-thinking culture where your expertise in protection and controls will strengthen the safety, reliability, and resilience of Canada’s power system.
Key Responsibilities
Protection Engineering and System Design
- Develop protection philosophies, design bases, and schemes for transmission lines, transformers, buses, breakers, feeders, capacitor or reactor banks, generation, and utility interconnections.
- Perform or review short-circuit studies, CT and VT selection, protection coordination, relay settings, logic equations, and calculation or settings reports.
- Evaluate system operating requirements, interconnection criteria, utility standards, equipment duty, redundancy, communications-assisted schemes, and failure modes.
Detailed Protection and Controls Design
- Develop and review P&C single-line diagrams, AC and DC schematics, logic diagrams, wiring diagrams, control-panel layouts, cable schedules, I/O lists, point assignments, and equipment interconnection drawings.
- Design or review station-service AC and DC systems, battery and charger requirements, DC distribution, control-building interfaces, relay panels, RTU and SCADA interfaces, and telecommunications requirements.
- Prepare specifications, bills of materials, data sheets, panel requirements, and vendor-document reviews for protective relays, control systems, metering, annunciation, and communications equipment.
Project Delivery and Technical Leadership
- Lead P&C scope from concept and FEED through detailed design, including design bases, engineering standards, estimates, schedules, resource plans, scopes of work, and issued-for-construction packages.
- Coordinate with substation physical, civil, structural, SCADA, telecommunications, system studies, operations, testing, commissioning, utility, client, and vendor teams.
- Maintain control of technical quality, budget, schedule, interfaces, and change; provide clear status reporting and timely escalation of project risks.
- Support proposals, client presentations, technical evaluations, and the development of long-term utility and energy-sector relationships.
Field, Testing, and Commissioning Support
- Develop or review testing and commissioning requirements and support factory acceptance testing, site acceptance testing, relay testing, functional testing, outage planning, and energization.
- Provide senior field support for troubleshooting, settings implementation, redline control, cutovers, deficiency resolution, record drawings, and project closeout.
Quality, Safety, and Team Development
- Authenticate engineering deliverables within professional competency and ensure compliance with applicable IEEE, IEC, CSA, Canadian Electrical Code, utility, reliability, and client requirements.
- Apply safety-in-design, operability, cybersecurity, redundancy, maintainability, and lifecycle-risk principles throughout the design.
- Lead independent and interdisciplinary reviews, mentor engineers and designers, and develop P&C standards, templates, calculation tools, and quality-control practices.
Qualifications
Education and Licensure
- Bachelor’s degree in Electrical Engineering from an accredited institution.
- Registered Professional Engineer (P.Eng.) in Alberta or another Canadian province and eligible for registration with APEGA.
Experience
- 10+ years of progressive electrical engineering experience, with substantial responsibility for high-voltage substation protection and controls design.
- Demonstrated experience developing protection philosophies, performing coordination or settings work, and producing detailed P&C design packages.
- Experience supporting panel fabrication, utility review, field testing, commissioning, brownfield cutovers, outages, or energization.
Technical Skills
- Advanced knowledge of protection schemes, microprocessor-based relays, CT and VT circuits, AC and DC control systems, breaker control, interlocking, metering, SCADA, telecommunications, and substation automation.
- Experience with protection-analysis software such as ASPEN OneLiner, CAPE, ETAP, SKM, or equivalent, and relay-vendor tools for SEL, GE, Siemens, Hitachi Energy or ABB equipment.
- Proficiency with AutoCAD and Bluebeam and strong capability in technical writing, calculation review, settings documentation, and client communication.
Desirable Assets
- Experience with IEC 61850, digital substations, redundant network architectures, RTU or gateway configuration, or utility telecommunications.
- Familiarity with AESO, WECC, NERC, or utility reliability and cybersecurity requirements applicable to Western Canadian power systems.
- Experience with transmission-connected generation, renewable energy, battery energy storage, industrial substations, or major grid interconnections.
Success in This Role Will Require
- Deep protection-engineering judgement and disciplined attention to selectivity, dependability, security, redundancy, and operability.
- Ability to translate complex system requirements into clear settings, logic, drawings, test requirements, and field-ready design packages.
- Strong client-facing communication, technical leadership, mentoring, quality-control, and commissioning-support capabilities.
- A collaborative spirit aligned with Juno’s values of Connect, Cultivate, Create.
Location & Travel
This position is based in Calgary, Alberta, with flexible work arrangements available. Applicants must be able to work full-time in Canada and be available for periodic multi-day travel to client offices, substations, panel shops, vendor facilities, and project sites across Western Canada.
Benefits & Perks
At Juno Engineering Canada, we are committed to nurturing a workplace that values innovation, collaboration, and personal growth. Our comprehensive benefits include:
- Competitive salary, performance-based bonuses, and profit-sharing program.
- Comprehensive health benefits and group retirement savings program.
- Continuous professional development, mentorship, and training.
- Engaging team-building events and a supportive, inclusive work culture.
About Juno Engineering Canada
For over 40 years, Juno Engineering Canada has been at the forefront of delivering innovative, sustainable engineering solutions across the energy and infrastructure sectors. Our people-driven approach—centered on collaboration, continuous improvement, and a commitment to excellence—ensures that every project not only meets but exceeds expectations. We are dedicated to building a diverse, inclusive environment where every team member is empowered to contribute to our collective success.
Apply Now
Are you ready to lead protection and controls engineering for critical power infrastructure? Join Juno Engineering Canada and apply your expertise to projects that will strengthen the safety, reliability, and resilience of Canada’s energy system.
Not the right fit? Search for Substation Protection and Controls Engineer jobs in Calgary, Alberta, Canada
About Juno Engineering Canada Inc.
Juno Engineering is an electrical engineering consulting firm which has proudly been providing services across Western Canada for 40 years.
With our traditional focus on efficient engineering and a growing list of accomplishments in the industry, we are excited to offer a full-suite of project services. Grounded by our to-the-point core principles and expanded talent pool, we have the extensive experience that enables us to handle all facets of energy projects.
From project scoping to close out, we have the talent and expertise to ensure efficient execution throughout the entire duration of a project. Project and client needs vary, which is why we recognize the need to be flexible in our approach and our deliverables.
Whatever the need, we know how to help. The Juno team consists of over 40 talented and extremely experienced individuals to supply custom and compliant solutions, all the while, maintaining the fundamental project essentials of safety, practical design, cost and schedule.
We are totally committed to your satisfaction and take pride in our list of long-time repeat clients. Our reputation and integrity are vital to the legacy we've built and that's something our clients notice.
Similar Jobs
Senior Substation Protection and Controls Engineer
Top Benefits
About the role
Are you a senior professional engineer with deep expertise in substation protection, controls, automation, and commissioning? Juno Engineering Canada Inc. is seeking a Senior Substation Protection & Controls Engineer to lead protection and controls engineering for utility, renewable energy, power generation, and industrial substation projects across Western Canada.
About the Role
This position is responsible for protection and controls engineering for greenfield and brownfield substations, switching stations, and grid interconnections. The role includes protection philosophies, fault and coordination studies, relay settings and logic, detailed P&C design, SCADA and telecommunications interfaces, AC and DC systems, testing, commissioning, and energization support.
In this role, you’ll serve as a technical lead, directing P&C design from concept and FEED through issued-for-construction documentation, panel fabrication, field implementation, testing, commissioning, and project closeout.
At Juno, we empower our team to drive sustainable progress across power generation, renewable energy, and advanced industrial projects. With over 40 years of engineering excellence, we foster a collaborative, forward-thinking culture where your expertise in protection and controls will strengthen the safety, reliability, and resilience of Canada’s power system.
Key Responsibilities
Protection Engineering and System Design
- Develop protection philosophies, design bases, and schemes for transmission lines, transformers, buses, breakers, feeders, capacitor or reactor banks, generation, and utility interconnections.
- Perform or review short-circuit studies, CT and VT selection, protection coordination, relay settings, logic equations, and calculation or settings reports.
- Evaluate system operating requirements, interconnection criteria, utility standards, equipment duty, redundancy, communications-assisted schemes, and failure modes.
Detailed Protection and Controls Design
- Develop and review P&C single-line diagrams, AC and DC schematics, logic diagrams, wiring diagrams, control-panel layouts, cable schedules, I/O lists, point assignments, and equipment interconnection drawings.
- Design or review station-service AC and DC systems, battery and charger requirements, DC distribution, control-building interfaces, relay panels, RTU and SCADA interfaces, and telecommunications requirements.
- Prepare specifications, bills of materials, data sheets, panel requirements, and vendor-document reviews for protective relays, control systems, metering, annunciation, and communications equipment.
Project Delivery and Technical Leadership
- Lead P&C scope from concept and FEED through detailed design, including design bases, engineering standards, estimates, schedules, resource plans, scopes of work, and issued-for-construction packages.
- Coordinate with substation physical, civil, structural, SCADA, telecommunications, system studies, operations, testing, commissioning, utility, client, and vendor teams.
- Maintain control of technical quality, budget, schedule, interfaces, and change; provide clear status reporting and timely escalation of project risks.
- Support proposals, client presentations, technical evaluations, and the development of long-term utility and energy-sector relationships.
Field, Testing, and Commissioning Support
- Develop or review testing and commissioning requirements and support factory acceptance testing, site acceptance testing, relay testing, functional testing, outage planning, and energization.
- Provide senior field support for troubleshooting, settings implementation, redline control, cutovers, deficiency resolution, record drawings, and project closeout.
Quality, Safety, and Team Development
- Authenticate engineering deliverables within professional competency and ensure compliance with applicable IEEE, IEC, CSA, Canadian Electrical Code, utility, reliability, and client requirements.
- Apply safety-in-design, operability, cybersecurity, redundancy, maintainability, and lifecycle-risk principles throughout the design.
- Lead independent and interdisciplinary reviews, mentor engineers and designers, and develop P&C standards, templates, calculation tools, and quality-control practices.
Qualifications
Education and Licensure
- Bachelor’s degree in Electrical Engineering from an accredited institution.
- Registered Professional Engineer (P.Eng.) in Alberta or another Canadian province and eligible for registration with APEGA.
Experience
- 10+ years of progressive electrical engineering experience, with substantial responsibility for high-voltage substation protection and controls design.
- Demonstrated experience developing protection philosophies, performing coordination or settings work, and producing detailed P&C design packages.
- Experience supporting panel fabrication, utility review, field testing, commissioning, brownfield cutovers, outages, or energization.
Technical Skills
- Advanced knowledge of protection schemes, microprocessor-based relays, CT and VT circuits, AC and DC control systems, breaker control, interlocking, metering, SCADA, telecommunications, and substation automation.
- Experience with protection-analysis software such as ASPEN OneLiner, CAPE, ETAP, SKM, or equivalent, and relay-vendor tools for SEL, GE, Siemens, Hitachi Energy or ABB equipment.
- Proficiency with AutoCAD and Bluebeam and strong capability in technical writing, calculation review, settings documentation, and client communication.
Desirable Assets
- Experience with IEC 61850, digital substations, redundant network architectures, RTU or gateway configuration, or utility telecommunications.
- Familiarity with AESO, WECC, NERC, or utility reliability and cybersecurity requirements applicable to Western Canadian power systems.
- Experience with transmission-connected generation, renewable energy, battery energy storage, industrial substations, or major grid interconnections.
Success in This Role Will Require
- Deep protection-engineering judgement and disciplined attention to selectivity, dependability, security, redundancy, and operability.
- Ability to translate complex system requirements into clear settings, logic, drawings, test requirements, and field-ready design packages.
- Strong client-facing communication, technical leadership, mentoring, quality-control, and commissioning-support capabilities.
- A collaborative spirit aligned with Juno’s values of Connect, Cultivate, Create.
Location & Travel
This position is based in Calgary, Alberta, with flexible work arrangements available. Applicants must be able to work full-time in Canada and be available for periodic multi-day travel to client offices, substations, panel shops, vendor facilities, and project sites across Western Canada.
Benefits & Perks
At Juno Engineering Canada, we are committed to nurturing a workplace that values innovation, collaboration, and personal growth. Our comprehensive benefits include:
- Competitive salary, performance-based bonuses, and profit-sharing program.
- Comprehensive health benefits and group retirement savings program.
- Continuous professional development, mentorship, and training.
- Engaging team-building events and a supportive, inclusive work culture.
About Juno Engineering Canada
For over 40 years, Juno Engineering Canada has been at the forefront of delivering innovative, sustainable engineering solutions across the energy and infrastructure sectors. Our people-driven approach—centered on collaboration, continuous improvement, and a commitment to excellence—ensures that every project not only meets but exceeds expectations. We are dedicated to building a diverse, inclusive environment where every team member is empowered to contribute to our collective success.
Apply Now
Are you ready to lead protection and controls engineering for critical power infrastructure? Join Juno Engineering Canada and apply your expertise to projects that will strengthen the safety, reliability, and resilience of Canada’s energy system.
Not the right fit? Search for Substation Protection and Controls Engineer jobs in Calgary, Alberta, Canada
About Juno Engineering Canada Inc.
Juno Engineering is an electrical engineering consulting firm which has proudly been providing services across Western Canada for 40 years.
With our traditional focus on efficient engineering and a growing list of accomplishments in the industry, we are excited to offer a full-suite of project services. Grounded by our to-the-point core principles and expanded talent pool, we have the extensive experience that enables us to handle all facets of energy projects.
From project scoping to close out, we have the talent and expertise to ensure efficient execution throughout the entire duration of a project. Project and client needs vary, which is why we recognize the need to be flexible in our approach and our deliverables.
Whatever the need, we know how to help. The Juno team consists of over 40 talented and extremely experienced individuals to supply custom and compliant solutions, all the while, maintaining the fundamental project essentials of safety, practical design, cost and schedule.
We are totally committed to your satisfaction and take pride in our list of long-time repeat clients. Our reputation and integrity are vital to the legacy we've built and that's something our clients notice.