About the role
Classification
Hourly
Summary/Objective
To manually remove molded parts from the machines and complete secondary work to these parts, inspect, label and pack the parts into boxes or on skids.
Essential Functions
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- To read, understand and follow documented procedures and work instructions
- Remove parts from machine, may come out in a bin under the machine or may have to be removed at the end of the machine cycle manually
- Clean and trim parts if necessary
- Complete secondary work on parts in accordance to work / visual instructions and quality specifications. ( May include affixing stickers to parts, drilling holes in parts, mounting hardware to parts, adding sealant to parts, gluing caps on parts and / or assembling parts together)
- 100% inspection to verify product is in accordance with work / visual instructions and quality specifications
- Pack and strap parts according to part specific packaging specifications. (May include putting parts and other hardware into cartons, stacking cartons on pallets, and / or stacking parts directly on pallets)
- Enter real time scrap reporting in ERP system
- Compliant to product identification and traceability requirements
- Keep work area safe and clean from sprues, trimmings, oil and water
- Complies with all corporate policies and the Occupational Health and Safety Administration rules (OHSA) while working
- Utilize proper tools as per quality specifications
- To wear any equipment, protective devices or clothing required by the Company; report to a manager or supervisor any known missing or defective equipment, protective device or known workplace hazard that may be dangerous to any worker and do not use or operate any equipment or work in a way that may endanger himself/herself or any other employee
- All other duties as assigned
Competencies
- Execution Excellence
- Anticipates/ Manages Complexity and Change
- Interpersonal/ Leadership
- Collaboration (Mutual Respect)
- Disciplined Approach/ Result Focus
- Earn Customer Loyalty (Internal/External)
Supervisory Responsibility
Not required
Work Environment
This job operates in a professional manufacturing shop floor environment.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Must work rotating 8 hour shifts
Ability to lift weights of up to 50 lbs
Position Type/Expected Hours of Work
This is a full-time position. Days and hours of work Continental 12 hours shift on rotating basis.
Travel
Not required
Required Education, Skills, and Experience
- Minimum High School Diploma
- Technically inclined
- Safety conscious
- Self-motivated
- Good visual skills and ability to judge slight variances in product
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
About Core Molding Technologies
Core Molding Technologies is a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America. The Company operates in one operating segment as a molder of thermoplastic and thermoset structural products. The Company’s operating segment consists of one reporting unit, Core Molding Technologies. The Company offers customers a wide range of manufacturing processes to fit various program volume and investment requirements. These thermoset processes include compression molding of sheet molding compound (“SMC”), resin transfer molding (“RTM”), liquid molding of dicyclopentadiene (“DCPD”), spray-up and hand-lay-up. The thermoplastic processes include direct long-fiber thermoplastics (“DLFT”) and structural foam and structural web injection molding. Core Molding Technologies serves a wide variety of markets, including the medium and heavy-duty truck, marine, automotive, agriculture, construction, and other commercial products. The demand for Core Molding Technologies’ products is affected by economic conditions in the United States, Mexico, and Canada. Core Molding Technologies’ operations may change proportionately more than revenues from operations.
About the role
Classification
Hourly
Summary/Objective
To manually remove molded parts from the machines and complete secondary work to these parts, inspect, label and pack the parts into boxes or on skids.
Essential Functions
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- To read, understand and follow documented procedures and work instructions
- Remove parts from machine, may come out in a bin under the machine or may have to be removed at the end of the machine cycle manually
- Clean and trim parts if necessary
- Complete secondary work on parts in accordance to work / visual instructions and quality specifications. ( May include affixing stickers to parts, drilling holes in parts, mounting hardware to parts, adding sealant to parts, gluing caps on parts and / or assembling parts together)
- 100% inspection to verify product is in accordance with work / visual instructions and quality specifications
- Pack and strap parts according to part specific packaging specifications. (May include putting parts and other hardware into cartons, stacking cartons on pallets, and / or stacking parts directly on pallets)
- Enter real time scrap reporting in ERP system
- Compliant to product identification and traceability requirements
- Keep work area safe and clean from sprues, trimmings, oil and water
- Complies with all corporate policies and the Occupational Health and Safety Administration rules (OHSA) while working
- Utilize proper tools as per quality specifications
- To wear any equipment, protective devices or clothing required by the Company; report to a manager or supervisor any known missing or defective equipment, protective device or known workplace hazard that may be dangerous to any worker and do not use or operate any equipment or work in a way that may endanger himself/herself or any other employee
- All other duties as assigned
Competencies
- Execution Excellence
- Anticipates/ Manages Complexity and Change
- Interpersonal/ Leadership
- Collaboration (Mutual Respect)
- Disciplined Approach/ Result Focus
- Earn Customer Loyalty (Internal/External)
Supervisory Responsibility
Not required
Work Environment
This job operates in a professional manufacturing shop floor environment.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Must work rotating 8 hour shifts
Ability to lift weights of up to 50 lbs
Position Type/Expected Hours of Work
This is a full-time position. Days and hours of work Continental 12 hours shift on rotating basis.
Travel
Not required
Required Education, Skills, and Experience
- Minimum High School Diploma
- Technically inclined
- Safety conscious
- Self-motivated
- Good visual skills and ability to judge slight variances in product
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
About Core Molding Technologies
Core Molding Technologies is a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America. The Company operates in one operating segment as a molder of thermoplastic and thermoset structural products. The Company’s operating segment consists of one reporting unit, Core Molding Technologies. The Company offers customers a wide range of manufacturing processes to fit various program volume and investment requirements. These thermoset processes include compression molding of sheet molding compound (“SMC”), resin transfer molding (“RTM”), liquid molding of dicyclopentadiene (“DCPD”), spray-up and hand-lay-up. The thermoplastic processes include direct long-fiber thermoplastics (“DLFT”) and structural foam and structural web injection molding. Core Molding Technologies serves a wide variety of markets, including the medium and heavy-duty truck, marine, automotive, agriculture, construction, and other commercial products. The demand for Core Molding Technologies’ products is affected by economic conditions in the United States, Mexico, and Canada. Core Molding Technologies’ operations may change proportionately more than revenues from operations.