About the role
Job Type:
Full Time
Location:
Mississauga, ON
Date Posted:
2025-08-12
Job ID:
R3527489
Job Duties:
- Responsible for repairing, modifying, rebuilding and/or debugging of equipment on-site or at customer’s site, working according to technical drawings and other specifications.
- Respects and abides by all applicable customer plant rules, works according to safety rules.
- Provides on-site start-up and commissioning assistance for machinery.
- Upon customer’s request or as required by the circumstances of the job, provides advice to the customer’s personnel on technical issues related to equipment.
- Requests approval from supervisor and/or engineering for any design changes or modifications performed to machines in the field, prior to execution.
- Provides marked-up drawings or sketches of any changes done in the field for the proper update of the machine by Engineering.
- Files weekly expense, activity and service reports according to established rules.
- Performs debugging /assembly/wiring activities, on the floor, as requested by the Supervisor.
- Ensures equipment is delivered to the highest level of quality by dutifully reporting any quality issues observed on equipment either on the floor or at the customer’s site.
- Maintains a constant state of readiness and is able to travel on short notice.
- Assists the Supervisor in maximizing billable hours for the department.
- Provides support to Training and in preparing Training Job aids as required.
- Supports the preparation of machine manuals and other related documentation.
- At the end of a service visit, always recommends machine improvements and parts replacements required for the proper functioning of customer’s equipment.
- Provides over the phone support to customers when required.
- On request from the Supervisor, performs follow-up visits to customers after installation, recommending action plans to improve productivity.
- Represents the company in meetings with the customer installation team and local contractors.
- Supports the Project Manager in their interactions with customers during the Commissioning phase.
Requirements:
- Post-secondary education in mechanical and/or electrical field. Millwright certificate would be an asset.
- Previous experience as a Field Service Technician is preferred.
- Must be able to fluently read mechanical assembly drawings, electrical and pneumatic schematics.
- Strong mechanical and electrical troubleshooting skills.
- Knowledge of problem solving techniques, root cause analysis is an asset.
- Knowledge and Hands-on experience on Allen Bradley, Siemens, ABB
- Excellent communication skills, both oral and in written report format in English.
- Organized, self-disciplined and professional in demeanor.
- Able to travel up to 65-70% of the time.
- Must have a valid passport
- Must be able to travel to the USA and overseas without restrictions
- Must have a valid driver’s license without restrictions
- Must be able to rent a car in any country without restrictions
About Advanced Technology Search Group
Specializing in advanced technology product development roles, ATSG recruiters are adept in the field and have an omniscient understanding of what our clients are searching for. Our expertise combined with our hands-on, personable approach ensures the best possible outcome, for both our clients and the candidates.
ATSG specializes in advanced product development roles in the Toronto job market. Our knowledgeable staff consistently offer a comprehensive and thoughtful recruitment experience. Our expertise combined with our impeccable customer service means we always deliver the best possible outcomes, for our clients and candidates.
With an in-depth knowledge of the industry, ATSG has placed itself at the forefront of the technology job market. Specializing in technology product development roles, we are proud to always offer the best positions and staff the best candidates. Our expertise combined with our impeccable customer service means we always deliver the best possible outcomes, for our clients and candidates.
About the role
Job Type:
Full Time
Location:
Mississauga, ON
Date Posted:
2025-08-12
Job ID:
R3527489
Job Duties:
- Responsible for repairing, modifying, rebuilding and/or debugging of equipment on-site or at customer’s site, working according to technical drawings and other specifications.
- Respects and abides by all applicable customer plant rules, works according to safety rules.
- Provides on-site start-up and commissioning assistance for machinery.
- Upon customer’s request or as required by the circumstances of the job, provides advice to the customer’s personnel on technical issues related to equipment.
- Requests approval from supervisor and/or engineering for any design changes or modifications performed to machines in the field, prior to execution.
- Provides marked-up drawings or sketches of any changes done in the field for the proper update of the machine by Engineering.
- Files weekly expense, activity and service reports according to established rules.
- Performs debugging /assembly/wiring activities, on the floor, as requested by the Supervisor.
- Ensures equipment is delivered to the highest level of quality by dutifully reporting any quality issues observed on equipment either on the floor or at the customer’s site.
- Maintains a constant state of readiness and is able to travel on short notice.
- Assists the Supervisor in maximizing billable hours for the department.
- Provides support to Training and in preparing Training Job aids as required.
- Supports the preparation of machine manuals and other related documentation.
- At the end of a service visit, always recommends machine improvements and parts replacements required for the proper functioning of customer’s equipment.
- Provides over the phone support to customers when required.
- On request from the Supervisor, performs follow-up visits to customers after installation, recommending action plans to improve productivity.
- Represents the company in meetings with the customer installation team and local contractors.
- Supports the Project Manager in their interactions with customers during the Commissioning phase.
Requirements:
- Post-secondary education in mechanical and/or electrical field. Millwright certificate would be an asset.
- Previous experience as a Field Service Technician is preferred.
- Must be able to fluently read mechanical assembly drawings, electrical and pneumatic schematics.
- Strong mechanical and electrical troubleshooting skills.
- Knowledge of problem solving techniques, root cause analysis is an asset.
- Knowledge and Hands-on experience on Allen Bradley, Siemens, ABB
- Excellent communication skills, both oral and in written report format in English.
- Organized, self-disciplined and professional in demeanor.
- Able to travel up to 65-70% of the time.
- Must have a valid passport
- Must be able to travel to the USA and overseas without restrictions
- Must have a valid driver’s license without restrictions
- Must be able to rent a car in any country without restrictions
About Advanced Technology Search Group
Specializing in advanced technology product development roles, ATSG recruiters are adept in the field and have an omniscient understanding of what our clients are searching for. Our expertise combined with our hands-on, personable approach ensures the best possible outcome, for both our clients and the candidates.
ATSG specializes in advanced product development roles in the Toronto job market. Our knowledgeable staff consistently offer a comprehensive and thoughtful recruitment experience. Our expertise combined with our impeccable customer service means we always deliver the best possible outcomes, for our clients and candidates.
With an in-depth knowledge of the industry, ATSG has placed itself at the forefront of the technology job market. Specializing in technology product development roles, we are proud to always offer the best positions and staff the best candidates. Our expertise combined with our impeccable customer service means we always deliver the best possible outcomes, for our clients and candidates.