Top Benefits
About the role
Project
TheWoodfibre LNGProject is located approximately 7 km west-southwest of Squamish, British Columbia. It involves the construction and operation of a liquefied natural gas (LNG) export facility on the previous Woodfibre pulp mill site, which would have a storage capacity of 250,000 m3 and would produce approximately 2.1 million tons per year of LNG.
**Woodfibre Management Ltd.**is a privately held Canadian company based in Vancouver and a subsidiary of Pacific Energy Corporation Limited.
Position
TheMillwright isan integral part ofWoodfibre LNG'sdynamic team, reporting directly to the Mechanical Maintenance Supervisor. This is a hands-on role involving the installation, maintenance, and repair of rotating equipment on industrial sites, all work is performed in accordance with applicable codes and safety regulations.
Key Responsibilities**:**
The successful applicant will:
- Prior to start-up of the plant, support the development of maintenance procedures
- Participate in plant walkdowns covering rotating equipment scope
- During Commissioning of the plant: verify installation and witness dynamic runs of rotating equipment
- Participate in and adhere to health and safety programs and policies
- Troubleshooting rotating assets, compressors, pumps, fans, and hydraulic systems
- Assist pipefitters with blinding and pipe strain
- Repair valves, pumps, fans & compressors
- Perform Major overhauls of Centrifugal Compressors
- Replace Dry gas seals
- Conduct Alignments
- Work closely with all other trades to acquire the highest availability and reliability of our equipment
- Install, inspect and repair of mechanical and hydraulic components
- Preform predictive and preventive maintenance on, pumps, gearboxes, fin fans, loading arms, hydraulics, & compressors
- Perform predictive and preventive maintenance (Examples: Lubrication, greasing, & vibration collection)
- Calculate loads and determine the appropriate rigging equipment and techniques for each task
HSSE
- 100% compliance with company HSE policies and guidelines
- Champion HSE as a member of the LNG Maintenance Team
- Timely intervention to mitigate risks and ensure the safety of personnel and plant
- Demonstrate a personal commitment to influence overall safety behavior in the plant
- Understanding of standard hand signals and communication protocols used when working with cranes and other lifting equipment
Requirements
Required Experience**:**
- British Columbia Journeyman Millwright Certification or Red Seal Journeyman
- Preference will be given to candidates who hold a dual ticket (Millwright/Pipefitter or Millwright/Welder)
- 5-7 years of experience in the oil and gas industry such as LNG plants, Refining & Upgrading
- Turbo Machinery Experience would be an asset
- Level 1 or 2 Vibration certification would be an asset
- Knowledge of various rigging methods and techniques for lifting and moving heavy materials safely
- Ability to calculate loads and determine the appropriate rigging equipment and techniques for each task
- Experience with piping troubleshooting and resolving piping system leaks
Additional Requirements**:**
- Master certification in Rigging would be an asset
- Ability to Support planned, unplanned Maintenance
- Ability to support Turnarounds
- Ability to work weekend and extended hours as required
- Ability to work in physically demanding environments
- Strong mechanical aptitude and problem-solving skills
- Experience working with large multi-disciplinary teams and contractors in a multicultural environment is an asset
- Communication/interpersonal skills – Ability to respectfully interact with coworkers through to management
- Accepts responsibility and demonstrates a commitment to the delivery of tasks
- Good written and verbal communication skills
- Ability to work well under pressure, handle multiple tasks, and change priorities within tight time frames.
- Ability to work collaboratively within a team environment
- Energetic in pursuit of continuous improvement processes -Must be legally entitled to work in Canada -The position is based on site in Squamish, BC (Project Site)
Only qualified candidates legally entitled to work in Canada will be contacted.
**Woodfibre Management Ltd.**is an equal opportunity employer.
Thank you in advance for your interest!
Benefits
Hourly Rate: CAD $60/hr
Not the right fit? Search for Millwright jobs in Squamish
About Woodfibre LNG
The Woodfibre LNG Project is operated by Woodfibre Management Ltd, a privately held Canadian company based in Vancouver, British Columbia. The Woodfibre LNG facility is being built on the site of the former Woodfibre pulp mill site, which is located about seven kilometers southwest of Squamish, B.C. on the traditional and unceded territory of the Sḵwx̱wú7mesh Úxwumixw (Squamish Nation).
Woodfibre LNG is the first LNG export facility in the world to commit to achieving net zero emissions by 2027.
During construction, Woodfibre LNG expects a peak workforce of more than 800 individuals, with over 100 long-term operating positions at the facility once construction is complete.
If you are interested in a career at Woodfibre LNG, please visit woodfibrelng.ca/careers
Similar jobs you might like
Top Benefits
About the role
Project
TheWoodfibre LNGProject is located approximately 7 km west-southwest of Squamish, British Columbia. It involves the construction and operation of a liquefied natural gas (LNG) export facility on the previous Woodfibre pulp mill site, which would have a storage capacity of 250,000 m3 and would produce approximately 2.1 million tons per year of LNG.
**Woodfibre Management Ltd.**is a privately held Canadian company based in Vancouver and a subsidiary of Pacific Energy Corporation Limited.
Position
TheMillwright isan integral part ofWoodfibre LNG'sdynamic team, reporting directly to the Mechanical Maintenance Supervisor. This is a hands-on role involving the installation, maintenance, and repair of rotating equipment on industrial sites, all work is performed in accordance with applicable codes and safety regulations.
Key Responsibilities**:**
The successful applicant will:
- Prior to start-up of the plant, support the development of maintenance procedures
- Participate in plant walkdowns covering rotating equipment scope
- During Commissioning of the plant: verify installation and witness dynamic runs of rotating equipment
- Participate in and adhere to health and safety programs and policies
- Troubleshooting rotating assets, compressors, pumps, fans, and hydraulic systems
- Assist pipefitters with blinding and pipe strain
- Repair valves, pumps, fans & compressors
- Perform Major overhauls of Centrifugal Compressors
- Replace Dry gas seals
- Conduct Alignments
- Work closely with all other trades to acquire the highest availability and reliability of our equipment
- Install, inspect and repair of mechanical and hydraulic components
- Preform predictive and preventive maintenance on, pumps, gearboxes, fin fans, loading arms, hydraulics, & compressors
- Perform predictive and preventive maintenance (Examples: Lubrication, greasing, & vibration collection)
- Calculate loads and determine the appropriate rigging equipment and techniques for each task
HSSE
- 100% compliance with company HSE policies and guidelines
- Champion HSE as a member of the LNG Maintenance Team
- Timely intervention to mitigate risks and ensure the safety of personnel and plant
- Demonstrate a personal commitment to influence overall safety behavior in the plant
- Understanding of standard hand signals and communication protocols used when working with cranes and other lifting equipment
Requirements
Required Experience**:**
- British Columbia Journeyman Millwright Certification or Red Seal Journeyman
- Preference will be given to candidates who hold a dual ticket (Millwright/Pipefitter or Millwright/Welder)
- 5-7 years of experience in the oil and gas industry such as LNG plants, Refining & Upgrading
- Turbo Machinery Experience would be an asset
- Level 1 or 2 Vibration certification would be an asset
- Knowledge of various rigging methods and techniques for lifting and moving heavy materials safely
- Ability to calculate loads and determine the appropriate rigging equipment and techniques for each task
- Experience with piping troubleshooting and resolving piping system leaks
Additional Requirements**:**
- Master certification in Rigging would be an asset
- Ability to Support planned, unplanned Maintenance
- Ability to support Turnarounds
- Ability to work weekend and extended hours as required
- Ability to work in physically demanding environments
- Strong mechanical aptitude and problem-solving skills
- Experience working with large multi-disciplinary teams and contractors in a multicultural environment is an asset
- Communication/interpersonal skills – Ability to respectfully interact with coworkers through to management
- Accepts responsibility and demonstrates a commitment to the delivery of tasks
- Good written and verbal communication skills
- Ability to work well under pressure, handle multiple tasks, and change priorities within tight time frames.
- Ability to work collaboratively within a team environment
- Energetic in pursuit of continuous improvement processes -Must be legally entitled to work in Canada -The position is based on site in Squamish, BC (Project Site)
Only qualified candidates legally entitled to work in Canada will be contacted.
**Woodfibre Management Ltd.**is an equal opportunity employer.
Thank you in advance for your interest!
Benefits
Hourly Rate: CAD $60/hr
Not the right fit? Search for Millwright jobs in Squamish
About Woodfibre LNG
The Woodfibre LNG Project is operated by Woodfibre Management Ltd, a privately held Canadian company based in Vancouver, British Columbia. The Woodfibre LNG facility is being built on the site of the former Woodfibre pulp mill site, which is located about seven kilometers southwest of Squamish, B.C. on the traditional and unceded territory of the Sḵwx̱wú7mesh Úxwumixw (Squamish Nation).
Woodfibre LNG is the first LNG export facility in the world to commit to achieving net zero emissions by 2027.
During construction, Woodfibre LNG expects a peak workforce of more than 800 individuals, with over 100 long-term operating positions at the facility once construction is complete.
If you are interested in a career at Woodfibre LNG, please visit woodfibrelng.ca/careers