Top Benefits
About the role
MHI Low Carbon Solutions Canada, ULC, a subsidiary of Mitsubishi Heavy Industries America, Inc. (MHIA)is looking for a Senior Process Engineer tojoin our team. This position is full-time, five (5) days per week out of the Calgary, Alberta office.
SCOPE Be part of Mission Net Zero through our group products, technologies, and services that help reduce CO2 emissions, as well as new solutions and innovations to be developed with partners around the world.
The Sr. Process Engineer (P.Eng.) plays a critical role in ensuring engineering excellence, regulatory compliance, and operational efficiency across Canadian carbon capture projects. The Sr. Process Engineer will primarily be responsible for authenticating process engineering deliverables and applying the APEGA stamp. Additionally, the Sr. Process Engineer will serve as a key technical liaison—leading discussions with clients and partners—and will support internal project teams throughout all phases of execution, including commissioning, operations, and maintenance.
Job Responsibilities
- Serve as the Responsible Member under the APEGA Permit to Practice, including the application of the Permit Holder stamp on all applicable engineering deliverables.
- Authenticate engineering work (including P.Eng stamp application on deliverables) in compliance with APEGA standards and regional regulatory requirements for projects executed in Japan, Canada, or the United States.
- Provide technical support to project and engineering teams across Japan, Canada, and the United States.
- Lead and facilitate technical meetings and discussions with internal stakeholders, clients, and external partners.
- Prepare process engineering calculations and technical documents, with a focus on design optimization, value engineering, and continuous improvement.
- Offer expert technical support during commissioning, start-up, and ongoing plant operations and maintenance.
- Deliver continuous operational support, including documentation of lessons learned, development of best practices, and recommendations for future project enhancements.
- Collaborate with teams in Japan and the U.S. to support the standardization of process engineering practices.
- Contribute to business development initiatives by offering technical insight and support aligned with strategic priorities.
- Represent the company at industry conferences through attendance, preparation, and presentation of technical content.
- May be required to obtain P.Eng. licensure in provinces outside Alberta to support or prepare for projects in those jurisdictions.
- This list of responsibilities is not all-inclusive, and an employee may be required to perform other relevant duties as assigned.
Qualifications & Skills
- Education Requirement: Bachelor’s degree from an accredited college or university in Chemical Engineering required.
- Experience: Minimum of 8 years of relevant experience. Commissioning experience and/or chemical plant operation experience desired.
- Skills/training/certifications:
- Valid Professional Engineer, P.Eng, license currently registered in APEGA and transferable to other Canadian provinces by comity.
- Proficient in the use of process simulation tools such as ASPEN, Pro/II, ProMax, or equivalent software.
- Demonstrated ability to communicate complex ideas effectively, both in writing and verbally. Must be able to adapt communication style to suit various audiences and levels within the organization.
- Advanced proficiency with Microsoft Office Suite applications and comfortable using other software as required.
WORKING CONDITIONS:
- Travel: Up to 25% domestic or international travel may be required.
- Weekend/late night work: Due to the time zone difference between Calgary and Japan, employees should expect 2–3 days per week where meetings are scheduled during evening hours (typically between 5:00 PM and 7:00 PM).
- Lifting/physical requirements: Regularly required to sit for long period, stand, walk, talk and/or hear. Frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
Why Should You Apply?
- Excellent Benefits and RPP
- Excellent growth and advancement opportunities
- Tuition reimbursement and on-the-job training
- Paid vacation, sick time and holidays
- Committed to quality product and services
- Great working environment and culture
- Employee Appreciation Programs and Events
MHI Low Carbon Solutions Canada ULC, a subsidiary of MHI- Americas, Inc is an Equal Employment Opportunity (EEO) employer and encourages women, Aboriginal people, persons with disabilities and members of visible minorities to apply.
About MHI Canada Aerospace, Inc.
MHI Canada Aerospace, Inc. (MHICA), a group company of MItsubishi Heavy Industries, is a Tier 1 manufacturer of major aircraft structures and assemblies, based in Mississauga, Ontario. Over the past decade, MHICA has built more than aircraft components, it has built a recognized worldwide reputation for capacity, precision, on-time delivery and excellence.
MHICA's facilities include a 270,000 sq ft state-of-the-art manufacture and assembly facility and a 70,000 sq ft supply chain and logistics centre, where more than 700 highly-skilled employees are working on Bombardier's sector-leading Global 5000/6000 and Challenger 350 business aircraft. MHICA's technicians build and join wing assemblies and fuselage centre sections, as well as perform systems and flight control assembly installations and testing.
Building complex aircraft structures at the highest levels requires a full and well-managed inventory. MHICA's logistics centre ensures the stable and on-time delivery of materials, sub-assemblies and tooling needed for continuous and fluid assembly. Our Supply Chain and Logistics Centre sources materials and manages more than 30 supply chain partners from across North America. MHCIA conducts quality control and inspections of incoming components and materials, assembles work kits and warehouses the inventory that keeps our assembly facility running smoothly.
MHICA's dedicated people, extensive experience, demonstrated efficiency and world-class facilities contribute to Bombardier Aerospace's success as a world-class aerospace leader, enabling them to be atop of the aerospace world in the business and commercial aircraft design and production.
MHI Canada Aerospace, Inc looks to the future and the development of new partnerships with leading aerospace manufacturers. For more information about MHICA's skilled workforce, logistics centre, and world-class assembly facilities, please contact us at 905-612-8131
Top Benefits
About the role
MHI Low Carbon Solutions Canada, ULC, a subsidiary of Mitsubishi Heavy Industries America, Inc. (MHIA)is looking for a Senior Process Engineer tojoin our team. This position is full-time, five (5) days per week out of the Calgary, Alberta office.
SCOPE Be part of Mission Net Zero through our group products, technologies, and services that help reduce CO2 emissions, as well as new solutions and innovations to be developed with partners around the world.
The Sr. Process Engineer (P.Eng.) plays a critical role in ensuring engineering excellence, regulatory compliance, and operational efficiency across Canadian carbon capture projects. The Sr. Process Engineer will primarily be responsible for authenticating process engineering deliverables and applying the APEGA stamp. Additionally, the Sr. Process Engineer will serve as a key technical liaison—leading discussions with clients and partners—and will support internal project teams throughout all phases of execution, including commissioning, operations, and maintenance.
Job Responsibilities
- Serve as the Responsible Member under the APEGA Permit to Practice, including the application of the Permit Holder stamp on all applicable engineering deliverables.
- Authenticate engineering work (including P.Eng stamp application on deliverables) in compliance with APEGA standards and regional regulatory requirements for projects executed in Japan, Canada, or the United States.
- Provide technical support to project and engineering teams across Japan, Canada, and the United States.
- Lead and facilitate technical meetings and discussions with internal stakeholders, clients, and external partners.
- Prepare process engineering calculations and technical documents, with a focus on design optimization, value engineering, and continuous improvement.
- Offer expert technical support during commissioning, start-up, and ongoing plant operations and maintenance.
- Deliver continuous operational support, including documentation of lessons learned, development of best practices, and recommendations for future project enhancements.
- Collaborate with teams in Japan and the U.S. to support the standardization of process engineering practices.
- Contribute to business development initiatives by offering technical insight and support aligned with strategic priorities.
- Represent the company at industry conferences through attendance, preparation, and presentation of technical content.
- May be required to obtain P.Eng. licensure in provinces outside Alberta to support or prepare for projects in those jurisdictions.
- This list of responsibilities is not all-inclusive, and an employee may be required to perform other relevant duties as assigned.
Qualifications & Skills
- Education Requirement: Bachelor’s degree from an accredited college or university in Chemical Engineering required.
- Experience: Minimum of 8 years of relevant experience. Commissioning experience and/or chemical plant operation experience desired.
- Skills/training/certifications:
- Valid Professional Engineer, P.Eng, license currently registered in APEGA and transferable to other Canadian provinces by comity.
- Proficient in the use of process simulation tools such as ASPEN, Pro/II, ProMax, or equivalent software.
- Demonstrated ability to communicate complex ideas effectively, both in writing and verbally. Must be able to adapt communication style to suit various audiences and levels within the organization.
- Advanced proficiency with Microsoft Office Suite applications and comfortable using other software as required.
WORKING CONDITIONS:
- Travel: Up to 25% domestic or international travel may be required.
- Weekend/late night work: Due to the time zone difference between Calgary and Japan, employees should expect 2–3 days per week where meetings are scheduled during evening hours (typically between 5:00 PM and 7:00 PM).
- Lifting/physical requirements: Regularly required to sit for long period, stand, walk, talk and/or hear. Frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
Why Should You Apply?
- Excellent Benefits and RPP
- Excellent growth and advancement opportunities
- Tuition reimbursement and on-the-job training
- Paid vacation, sick time and holidays
- Committed to quality product and services
- Great working environment and culture
- Employee Appreciation Programs and Events
MHI Low Carbon Solutions Canada ULC, a subsidiary of MHI- Americas, Inc is an Equal Employment Opportunity (EEO) employer and encourages women, Aboriginal people, persons with disabilities and members of visible minorities to apply.
About MHI Canada Aerospace, Inc.
MHI Canada Aerospace, Inc. (MHICA), a group company of MItsubishi Heavy Industries, is a Tier 1 manufacturer of major aircraft structures and assemblies, based in Mississauga, Ontario. Over the past decade, MHICA has built more than aircraft components, it has built a recognized worldwide reputation for capacity, precision, on-time delivery and excellence.
MHICA's facilities include a 270,000 sq ft state-of-the-art manufacture and assembly facility and a 70,000 sq ft supply chain and logistics centre, where more than 700 highly-skilled employees are working on Bombardier's sector-leading Global 5000/6000 and Challenger 350 business aircraft. MHICA's technicians build and join wing assemblies and fuselage centre sections, as well as perform systems and flight control assembly installations and testing.
Building complex aircraft structures at the highest levels requires a full and well-managed inventory. MHICA's logistics centre ensures the stable and on-time delivery of materials, sub-assemblies and tooling needed for continuous and fluid assembly. Our Supply Chain and Logistics Centre sources materials and manages more than 30 supply chain partners from across North America. MHCIA conducts quality control and inspections of incoming components and materials, assembles work kits and warehouses the inventory that keeps our assembly facility running smoothly.
MHICA's dedicated people, extensive experience, demonstrated efficiency and world-class facilities contribute to Bombardier Aerospace's success as a world-class aerospace leader, enabling them to be atop of the aerospace world in the business and commercial aircraft design and production.
MHI Canada Aerospace, Inc looks to the future and the development of new partnerships with leading aerospace manufacturers. For more information about MHICA's skilled workforce, logistics centre, and world-class assembly facilities, please contact us at 905-612-8131