MIE407H1 - Nuclear Reactor Theory and Design
Top Benefits
About the role
Date Posted: 06/27/2025
Req ID: 43971
Faculty/Division: Faculty of Applied Science & Engineering
Department: Dept of Mechanical & Industrial Eng
Campus: St. George (Downtown Toronto)
Description:
Course number and title: MIE407H1 - Nuclear Reactor Theory and Design
Course description: This course covers the basic principles of the neutronic design and analysis of nuclear fission reactors with a focus on Generation IV nuclear systems. Topics include radioactivity, neutron interactions with matter, neutron diffusion and moderation, the fission chain reaction, the critical reactor equation, reactivity effects and reactor kinetics. Multigroup neutron diffusion calculations are demonstrated using fast-spectrum reactor designs.
Estimated course enrolment (approximately): 40
Estimated TA support: TBD
Class schedule: TBD
Sessional dates of appointment: September to December 2025
Salary: $15,000 (per half course inclusive of vacation pay) Please note that should rates stipulated in the collective agreement vary from rates stated in this posting, the rates stated in the collective agreement shall prevail.
Minimum qualifications: Applicants should have a strong record of presenting lectures or acting as a teaching assistant. Applicants must be able to demonstrate considerable depth of knowledge and experience in the subject area. All applicants should have excellent communication skills - both oral and written. Professional Engineer (P.Eng.) or Limited License (LEL) is strongly preferred. Engineering Intern (EIT) is also acceptable.
Description of duties: Preparation of lectures and course materials; delivery of lectures; supervision of Teaching Assistants; setting and marking of tests and exams; evaluation of final grades; contact with students.
Application instructions: Please submit a Unit 3 Sessional Instructor Application Form, Resume and Teaching Dossier merged into a single PDF file to the MIE Undergraduate Office by email at ugservices@mie.utoronto.ca no later than July 24, 2025 at 11:59pm (eastern time). The Course Instructor Application Form can be found on the MIE Careers page here: https://www.mie.utoronto.ca/faculty-staff/careers/. Applicants must include full contact information of their supervisor, plus two U of T employees (faculty of staff) who can testify to the teaching skills of the applicant. If during the application and/or selection process you require accommodation due to a disability, please contact ugservices@mie.utoronto.ca. The appointment will be made at the earliest possible time before the commencement of classes by the Associate Chair (Undergraduate) of the Department of Mechanical and Industrial Engineering. No other offers or notices of the outcome of applications are authorized by the Department. Final availability of the position is contingent upon final course determination, enrolment, budgetary considerations, and the final determination of assignments flowing from Article 14:03 of the Collective Agreement.
Closing Date: 07/24/2025, 11:59PM EDT
**
This job is posted in accordance with the CUPE 3902 Unit 3 Collective Agreement.
It is understood that some announcements of vacancies are tentative, pending final course determinations and enrolment. Should rates stipulated in the collective agreement vary from rates stated in this posting, the rates stated in the collective agreement shall prevail.
Preference in hiring is given to qualified individuals advanced to the rank of Sessional Lecturer II or Sessional Lecturer III in accordance with Article 14:12 of the CUPE 3902 Unit 3 collective agreement.
Please note: Undergraduate or graduate students and postdoctoral fellows of the University of Toronto are covered by the CUPE 3902 Unit 1 collective agreement rather than the Unit 3 collective agreement, and should not apply for positions posted under the Unit 3 collective agreement.
About University of Toronto
Founded in 1827, the University of Toronto is Canada’s top university with a long history of challenging the impossible and transforming society through the ingenuity and resolve of our faculty, students, alumni, and supporters.
We are proud to be one of the world’s top research-intensive universities, bringing together top minds from every conceivable background and discipline to collaborate on the world’s most pressing challenges. As a catalyst for discovery, innovation, and progress, we prepare our students for success through an outstanding global education and commitment to inclusive excellence.
The ideas, innovations, and actions of more than 660,000 graduates advance U of T’s impact on communities across the globe.
MIE407H1 - Nuclear Reactor Theory and Design
Top Benefits
About the role
Date Posted: 06/27/2025
Req ID: 43971
Faculty/Division: Faculty of Applied Science & Engineering
Department: Dept of Mechanical & Industrial Eng
Campus: St. George (Downtown Toronto)
Description:
Course number and title: MIE407H1 - Nuclear Reactor Theory and Design
Course description: This course covers the basic principles of the neutronic design and analysis of nuclear fission reactors with a focus on Generation IV nuclear systems. Topics include radioactivity, neutron interactions with matter, neutron diffusion and moderation, the fission chain reaction, the critical reactor equation, reactivity effects and reactor kinetics. Multigroup neutron diffusion calculations are demonstrated using fast-spectrum reactor designs.
Estimated course enrolment (approximately): 40
Estimated TA support: TBD
Class schedule: TBD
Sessional dates of appointment: September to December 2025
Salary: $15,000 (per half course inclusive of vacation pay) Please note that should rates stipulated in the collective agreement vary from rates stated in this posting, the rates stated in the collective agreement shall prevail.
Minimum qualifications: Applicants should have a strong record of presenting lectures or acting as a teaching assistant. Applicants must be able to demonstrate considerable depth of knowledge and experience in the subject area. All applicants should have excellent communication skills - both oral and written. Professional Engineer (P.Eng.) or Limited License (LEL) is strongly preferred. Engineering Intern (EIT) is also acceptable.
Description of duties: Preparation of lectures and course materials; delivery of lectures; supervision of Teaching Assistants; setting and marking of tests and exams; evaluation of final grades; contact with students.
Application instructions: Please submit a Unit 3 Sessional Instructor Application Form, Resume and Teaching Dossier merged into a single PDF file to the MIE Undergraduate Office by email at ugservices@mie.utoronto.ca no later than July 24, 2025 at 11:59pm (eastern time). The Course Instructor Application Form can be found on the MIE Careers page here: https://www.mie.utoronto.ca/faculty-staff/careers/. Applicants must include full contact information of their supervisor, plus two U of T employees (faculty of staff) who can testify to the teaching skills of the applicant. If during the application and/or selection process you require accommodation due to a disability, please contact ugservices@mie.utoronto.ca. The appointment will be made at the earliest possible time before the commencement of classes by the Associate Chair (Undergraduate) of the Department of Mechanical and Industrial Engineering. No other offers or notices of the outcome of applications are authorized by the Department. Final availability of the position is contingent upon final course determination, enrolment, budgetary considerations, and the final determination of assignments flowing from Article 14:03 of the Collective Agreement.
Closing Date: 07/24/2025, 11:59PM EDT
**
This job is posted in accordance with the CUPE 3902 Unit 3 Collective Agreement.
It is understood that some announcements of vacancies are tentative, pending final course determinations and enrolment. Should rates stipulated in the collective agreement vary from rates stated in this posting, the rates stated in the collective agreement shall prevail.
Preference in hiring is given to qualified individuals advanced to the rank of Sessional Lecturer II or Sessional Lecturer III in accordance with Article 14:12 of the CUPE 3902 Unit 3 collective agreement.
Please note: Undergraduate or graduate students and postdoctoral fellows of the University of Toronto are covered by the CUPE 3902 Unit 1 collective agreement rather than the Unit 3 collective agreement, and should not apply for positions posted under the Unit 3 collective agreement.
About University of Toronto
Founded in 1827, the University of Toronto is Canada’s top university with a long history of challenging the impossible and transforming society through the ingenuity and resolve of our faculty, students, alumni, and supporters.
We are proud to be one of the world’s top research-intensive universities, bringing together top minds from every conceivable background and discipline to collaborate on the world’s most pressing challenges. As a catalyst for discovery, innovation, and progress, we prepare our students for success through an outstanding global education and commitment to inclusive excellence.
The ideas, innovations, and actions of more than 660,000 graduates advance U of T’s impact on communities across the globe.