Back to job search
SGS logo

Structural / Civil Inspector (Contract)

  • Kelowna, BC
  • On-site
  • Posted Nov 19, 2026
  • 1 position

$55–$90 / hour

Opens an external site

Sign in to save this job
Employment type
Contract
Minimum education
Professional degree
Apply by
Dec 18, 2026
Posting language
English

Job summary

The inspector will perform structural and civil site inspections to ensure compliance with engineering drawings, project specifications, and quality standards. Responsibilities include verifying materials, welding, coatings, and construction activities while documenting results and managing non-conformities.

Job details

Company Description We are SGS – the world’s leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. Job Description SGS is looking for Structural/Civil Inspectors (Contract) for site locations and shops. The assignement would start in January 2027 and would be on going. Locations: Site inspections in Kitimat, BC; shop/vendor inspections across BC and Alberta. Pay: $75–$90/hour for site work; $55–$60/hour for shop work. Start: January 2027. Schedule: Intermittent/as needed—not guaranteed full-time hours. Structural (Shop): verification of structural steel materials, fabrication, welding, surface treatment, erection, and installation to ensure compliance with approved engineering drawings, project specifications, applicable codes, and quality requirements Review approved fabrication drawings, specifications, ITP, QCP, WPS/PQR/WPQ and fabrication procedures Attend kick-off, pre-inspection meetings, witness, surveillance and hold points, as required Verify material grades, MTRs, dimensions, identification, heat numbers and traceability Inspect cutting, beveling, edge preparation, fit-up and dimensional accuracy Review welding procedures and qualifications; inspect fit-up, preheating, welding parameters and workmanship Verify RT, UT, MT and PT activities, procedures, personnel qualifications and reports as specified Check member lengths, profiles, straightness, squareness, hole locations, connection details and tolerances Verify bolt grades, sizes, hole dimensions, nuts, washers and connection arrangements Inspect abrasive blasting, surface cleanliness, surface profile and environmental conditions Verify coating specifications, application, DFT, curing and holiday testing where applicable Verify overall workmanship, identification, marking, preservation, packaging and shipment readiness Prepare detailed reports documenting inspection results, including any issues found. Recording inspection results and any non-conformities Investigating Non-Conformities i.e. identifying causes and assisting in corrective actions. Structural (Site): Covering steel erection, alignment, bolted connections, field welding, anchor bolts, grouting and structural installation. Verify delivered structural steel components, identification, traceability and transportation damage. Inspect anchor bolts, base plates, embedded plates, grout and supporting foundations Verify installation of columns, beams, bracing, trusses, platforms and structural connections Check structural alignment, plumbness, elevations, dimensions and tolerances Verify bolt grades, installation, tightening, pre-tensioning and inspection records. Verify WPS/WPQ, joint preparation, fit-up, welding workmanship and applicable preheat requirements. Witness or review field weld NDE activities and reports as required by the ITP Verify changes, repairs and deviations against approved engineering drawings and dispositions Inspect coating damage, surface preparation, touch-up painting, DFT and fireproofing where applicable Verify structural completeness, connection integrity, outstanding deficiencies and final acceptance documentation. CIVIL (Site): monitoring and verifying civil construction activities to ensure compliance with approved engineering drawings, project specifications, applicable codes, construction procedures, and quality requirements. Site Preparation and Earthworks Foundation and Reinforcement Inspection Concrete Inspection and Testing Inspection of Underground Utilities and Drainage Inspection of Waterproofing and Protective Systems Experience in soil classification, compaction and field density testing Experience in rebar inspection, formwork and foundation construction Experience in underground piping, drainage, trenching and utility installation Experience with ITPs, QCPs, NCRs, quality documentation and construction surveillance Qualifications Structural CWB-Level 2 with structural steel welding experience Familiarity with CSA W47.1, W59, S16, ASTM, ASME IX, SSPC, etc.. Civil/Structural/Mechanical Engineering degree or diploma 5+ years of fabrication and inspection experience at manufacturing shops 5+ years of fabrication and inspection experience at site Experience in fabrication and erection surveillance, ITP implementation, NCR management and quality documentation Civil: ACI Grade I / ICC Reinforced Concrete SI Bachelor's degree or diploma in Civil Engineering or Construction Engineering Technology Minimum 5 years of relevant civil construction inspection experience ACI Concrete Field Testing Technician or equivalent certification Familiarity with CSA 23.1 / A23.2, ACI 318 / 301, etc. Additional details: Work schedule and hours of work: Intermittent i.e. when & where required subject to job requirement Pay Rate (site): $75/hr. to $90/hr. (Shop): $55/hr. to $60/hr. Per diems (Shop): Expenses will be covered at cost if inspection site is beyond round trip 200 kms from Inspector place of residence and requires overnight stay at hotel Per diems (Site): Expenses will be covered at cost Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression and Indigenous status, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities, or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. Accommodations are available on request for qualified candidates during each stage of the recruitment process. Please note that candidates applying for Canadian job openings should be authorized to work in Canada.

What you’ll do

The inspector will perform structural and civil site inspections to ensure compliance with engineering drawings, project specifications, and quality standards. Responsibilities include verifying materials, welding, coatings, and construction activities while documenting results and managing non-conformities.

Requirements

Candidates must hold a degree or diploma in Civil, Structural, or Mechanical Engineering and possess at least 5 years of relevant inspection experience. Required certifications include CWB-Level 2 for structural roles and ACI Grade I or ICC Reinforced Concrete SI for civil roles.

Benefits

  • Expenses covered for travel beyond 200km

Listed skills

  • Quality Control · Preferred
  • Technical Reporting · Preferred
  • Safety Compliance · Preferred

Other relevant skills

Identified from the job description. Confirm important requirements above.

  • Structural inspection
  • Civil inspection
  • Welding inspection
  • CWB-Level 2
  • ACI Concrete Field Testing
  • Non-destructive testing
  • Quality control
  • Blueprint reading
  • Material verification
  • Coating inspection
  • Non-conformity management
  • Technical reporting
  • Site surveillance
  • Fabrication inspection
  • Safety compliance
  • Management
  • Construction
  • Mechanical Engineering
  • Cleanliness
  • Packaging And Labeling
  • Fabrication
  • Welding
  • Civil Engineering
  • Construction Inspection
  • Reinforced Concrete
  • Engineering Drawings
  • Painting
  • Traceability
  • Construction Engineering
  • Surface Finishing
  • Abrasive Blasting
  • Rebar
  • Metal Coating
  • Structural Steel
  • Site Inspection
  • Underground Utilities
  • ASME Boiler And Pressure Vessel Code (BPVC)
  • Waterproofing
  • Earthworks
  • Workmanship
  • Trenching
  • ASTM International Standards
  • Welding Procedure Specification
  • ACI Concrete Field Testing Technician
  • Soil Classification
  • Densitometry
  • Fireproofing
  • Structural Steel Welding

Job areas

  • Construction
  • Engineering
  • Manufacturing
  • Energy
  • Civil Inspector
  • Construction / Building Inspector
  • Civil Engineering Technicians
  • Construction and Building Inspectors

More jobs from SGS

See all jobs from SGS